1,083
edits
Changes
Jump to navigation
Jump to search
Product Opener/Installation/Debian or Ubuntu (view source)
Revision as of 13:23, 3 February 2015
, 13:23, 3 February 2015Created page with "Also see Product Opener Installation This page lists all the steps necessary to install Product Opener on Debian, including a development environment. All instructions b..."
Also see [[Product Opener Installation]]
This page lists all the steps necessary to install Product Opener on Debian, including a development environment.
All instructions below are for user "stephane", please use your own name. :-)
== Open Food Facts test / development server ==
OFF test / development server is a small dedicated server ("kimsufi 2G", the cheap sub-brand of OVH).
* Linux ks3095298.kimsufi.com 3.10.23-xxxx-std-ipv6-64 #1 SMP Tue Mar 18 14:48:24 CET 2014 x86_64 GNU/Linux
* CPU: Intel(R) Atom(TM) CPU 230 @ 1.60GHz - Cores: 2 - Cache: 512KB
* RAM: 2 Gb
* Disk: 1 Tb
== Debian install ==
Fresh Debian install with OVH / kimsufi install process:
* Step 1:
** OS - Type: Basic
** Debian 7.5 stable (Wheezy) - debian 7 - 64 bits
* Step 3: Partitions
** Default:
*** / ext4 20 Gb
*** /home/ ext4 979.5 Gb
*** swap 1 x 512 Mb
== DNS ==
ks3095298.kimsufi.com IP address: 94.23.195.82
Create 2 A records in the DNS zone of the domain you want to use:
* openfoodfacts.ovh 94.23.195.82
** *.openfoodfacts.ovh 94.23.195.82
== Install ==
=== Update Debian ===
Usually done by OVH Debian install:
<pre>
apt-get update
apt-get upgrade
</pre>
=== Security ===
Install fail2ban and sudo:
<pre>
apt-get install fail2ban
apt-get install sudo
</pre>
Create an user and give it sudo access:
<pre>
adduser stephane
adduser stephane sudo
</pre>
=== Install software used by Product Opener ===
<pre>
apt-get install mongodb
apt-get install memcached
apt-get install imagemagick
apt-get install tesseract-ocr
apt-get install tesseract-ocr-fra
apt-get install exim4
dpkg-reconfigure exim4-config
- Internet Site mail is sent by smtp
- 127.0.0.1
apt-get install geoip-bin geoip-database
</pre>
=== Install libraries used by Product Opener ===
<pre>
apt-get install zlib1g-dev
</pre>
=== Install development tools ===
Note: the Product Opener code is currently on a private bitbucket.org repository and is in the process of being made publicly available (open source). If you want to help us to clean / document Product Opener to open it, request access to the bitbucket repository: stephane@openfoodfacts.org
<pre>
apt-get install build-essential
apt-get install git
git clone https://stephane@bitbucket.org/openfoodfacts/product-opener.git
</pre>
(get the link for your user on bitbucket.org)
=== Apache 2.2 + mod_perl: Product Opener backend ===
<pre>
apt-get install libperl-dev
cd /home/stephane
mkdir src
cd src
wget http://apache.crihan.fr/dist//httpd/httpd-2.2.29.tar.gz
tar xvfz httpd-2.2.29.tar.gz
cd httpd-2.2.29
./configure --with-mpm=prefork --prefix=/home/stephane/apache --enable-rewrite --enable-proxy --enable-proxy_http --enable-deflate --disable-userdir --enable-headers
make
make install
wget http://mir2.ovh.net/ftp.apache.org/dist/perl/mod_perl-2.0.8.tar.gz
tar xvfz mod_perl-2.0.8.tar.gz
cd mod_perl-2.0.8
perl Makefile.PL MP_APXS=/home/stephane/apache/bin/apxs
make
make install
</pre>
=== Apache 2.4 - light weight reverse proxy ===
<pre>
apt-get install libpcre3 libpcre3-dev
cd /home/stephane/src
wget http://apache.websitebeheerjd.nl//httpd/httpd-2.4.12.tar.gz
tar xvfz httpd-2.4.12.tar.gz
cd httpd-2.4.12
cd srclib
wget http://mir2.ovh.net/ftp.apache.org/dist//apr/apr-1.5.1.tar.gz
wget http://mir2.ovh.net/ftp.apache.org/dist//apr/apr-util-1.5.4.tar.gz
tar xvfz apr-1.5.1.tar.gz
tar xvfz apr-util-1.5.4.tar.gz
ln -s apr-1.5.1 ap
ln -s apr-util-1.5.4 apr-util
cd ..
./configure --prefix=/home/stephane/proxy --enable-rewrite --enable-proxy --enable-proxy_http --disable-userdir --enable-headers --enable-expires --enable-mime --enable-so --with-included-apr
make
make install
</pre>
in proxy/conf/httpd.conf :
uncomment #LoadModule rewrite_module modules/mod_rewrite.so
uncomment #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
Add:
=== Install Perl modules ===
If possible, use apt-get to install packages directly. If they are not available, you can use cpan to install the modules.
<pre>
apt-get install libwww-perl libimage-magick-perl
apt-get install libxml-encoding-perl libtext-unaccent-perl libmime-lite-perl
apt-get install libcache-memcached-fast-perl libjson-perl libclone-perl libgraphviz-perl
apt-get install libmime-lite-perl # needs to be done after installing exim4
apt-get install libcrypt-passwdmd5-perl libencode-detect-perl libgraphics-color-perl libbarcode-zbar-perl libmongodb-perl liburi-find-perl
</pre>
Modules that could not be installed using apt-get:
<pre>
cpan
install URI::Escape::XS
install Image::OCR::Tesseract # needs imagemagick installed first
</pre>
=== Create some paths and links ===
<pre>
cd /home/stephane/product-opener/cgi
ln -s ./ Blogs
ln -s S
This page lists all the steps necessary to install Product Opener on Debian, including a development environment.
All instructions below are for user "stephane", please use your own name. :-)
== Open Food Facts test / development server ==
OFF test / development server is a small dedicated server ("kimsufi 2G", the cheap sub-brand of OVH).
* Linux ks3095298.kimsufi.com 3.10.23-xxxx-std-ipv6-64 #1 SMP Tue Mar 18 14:48:24 CET 2014 x86_64 GNU/Linux
* CPU: Intel(R) Atom(TM) CPU 230 @ 1.60GHz - Cores: 2 - Cache: 512KB
* RAM: 2 Gb
* Disk: 1 Tb
== Debian install ==
Fresh Debian install with OVH / kimsufi install process:
* Step 1:
** OS - Type: Basic
** Debian 7.5 stable (Wheezy) - debian 7 - 64 bits
* Step 3: Partitions
** Default:
*** / ext4 20 Gb
*** /home/ ext4 979.5 Gb
*** swap 1 x 512 Mb
== DNS ==
ks3095298.kimsufi.com IP address: 94.23.195.82
Create 2 A records in the DNS zone of the domain you want to use:
* openfoodfacts.ovh 94.23.195.82
** *.openfoodfacts.ovh 94.23.195.82
== Install ==
=== Update Debian ===
Usually done by OVH Debian install:
<pre>
apt-get update
apt-get upgrade
</pre>
=== Security ===
Install fail2ban and sudo:
<pre>
apt-get install fail2ban
apt-get install sudo
</pre>
Create an user and give it sudo access:
<pre>
adduser stephane
adduser stephane sudo
</pre>
=== Install software used by Product Opener ===
<pre>
apt-get install mongodb
apt-get install memcached
apt-get install imagemagick
apt-get install tesseract-ocr
apt-get install tesseract-ocr-fra
apt-get install exim4
dpkg-reconfigure exim4-config
- Internet Site mail is sent by smtp
- 127.0.0.1
apt-get install geoip-bin geoip-database
</pre>
=== Install libraries used by Product Opener ===
<pre>
apt-get install zlib1g-dev
</pre>
=== Install development tools ===
Note: the Product Opener code is currently on a private bitbucket.org repository and is in the process of being made publicly available (open source). If you want to help us to clean / document Product Opener to open it, request access to the bitbucket repository: stephane@openfoodfacts.org
<pre>
apt-get install build-essential
apt-get install git
git clone https://stephane@bitbucket.org/openfoodfacts/product-opener.git
</pre>
(get the link for your user on bitbucket.org)
=== Apache 2.2 + mod_perl: Product Opener backend ===
<pre>
apt-get install libperl-dev
cd /home/stephane
mkdir src
cd src
wget http://apache.crihan.fr/dist//httpd/httpd-2.2.29.tar.gz
tar xvfz httpd-2.2.29.tar.gz
cd httpd-2.2.29
./configure --with-mpm=prefork --prefix=/home/stephane/apache --enable-rewrite --enable-proxy --enable-proxy_http --enable-deflate --disable-userdir --enable-headers
make
make install
wget http://mir2.ovh.net/ftp.apache.org/dist/perl/mod_perl-2.0.8.tar.gz
tar xvfz mod_perl-2.0.8.tar.gz
cd mod_perl-2.0.8
perl Makefile.PL MP_APXS=/home/stephane/apache/bin/apxs
make
make install
</pre>
=== Apache 2.4 - light weight reverse proxy ===
<pre>
apt-get install libpcre3 libpcre3-dev
cd /home/stephane/src
wget http://apache.websitebeheerjd.nl//httpd/httpd-2.4.12.tar.gz
tar xvfz httpd-2.4.12.tar.gz
cd httpd-2.4.12
cd srclib
wget http://mir2.ovh.net/ftp.apache.org/dist//apr/apr-1.5.1.tar.gz
wget http://mir2.ovh.net/ftp.apache.org/dist//apr/apr-util-1.5.4.tar.gz
tar xvfz apr-1.5.1.tar.gz
tar xvfz apr-util-1.5.4.tar.gz
ln -s apr-1.5.1 ap
ln -s apr-util-1.5.4 apr-util
cd ..
./configure --prefix=/home/stephane/proxy --enable-rewrite --enable-proxy --enable-proxy_http --disable-userdir --enable-headers --enable-expires --enable-mime --enable-so --with-included-apr
make
make install
</pre>
in proxy/conf/httpd.conf :
uncomment #LoadModule rewrite_module modules/mod_rewrite.so
uncomment #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
Add:
=== Install Perl modules ===
If possible, use apt-get to install packages directly. If they are not available, you can use cpan to install the modules.
<pre>
apt-get install libwww-perl libimage-magick-perl
apt-get install libxml-encoding-perl libtext-unaccent-perl libmime-lite-perl
apt-get install libcache-memcached-fast-perl libjson-perl libclone-perl libgraphviz-perl
apt-get install libmime-lite-perl # needs to be done after installing exim4
apt-get install libcrypt-passwdmd5-perl libencode-detect-perl libgraphics-color-perl libbarcode-zbar-perl libmongodb-perl liburi-find-perl
</pre>
Modules that could not be installed using apt-get:
<pre>
cpan
install URI::Escape::XS
install Image::OCR::Tesseract # needs imagemagick installed first
</pre>
=== Create some paths and links ===
<pre>
cd /home/stephane/product-opener/cgi
ln -s ./ Blogs
ln -s S